Gate Valves

Gate valve suitable for irrigation systems, cooling systems, heating systems. Should not be used for regulation. Design for hazardous gases up to and including DN 25, for non-hazardous gases up to and including DN 50. The valve is equipped with a non-rising stem and has a low pressure drop. Female thread according to ISO 228. The valve complies with PED 2014/68/EU.
Gate Valve VM2241
Gate valve suitable for irrigation systems, cooling systems, heating systems. Should not be used for regulation. Design for hazardous gases up to and including DN 25, for non-hazardous gases up to and including DN 50. The valve is equipped with a non-rising stem and has a low pressure drop. Female thread according to ISO 228. The valve complies with PED 2014/68/EU.
Gate valve suitable for hydraulic, chemical, steam, oil, gas, oxygen and processing applications. The valve is equipped with a non-rising stem and has a low pressure drop and full flow. Equipped with female thread according to ISO 228. Leakage tested according to 12266-1 and API 598. The valve complies with PED 2014/68/EU. Material certificate EN 10204-3.1 is available on request.
Gate Valve VM2247
Gate valve suitable for hydraulic, chemical, steam, oil, gas, oxygen and processing applications. The valve is equipped with a non-rising stem and has a low pressure drop and full flow. Equipped with female thread according to ISO 228. Leakage tested according to 12266-1 and API 598. The valve complies with PED 2014/68/EU. Material certificate EN 10204-3.1 is available on request.
Gate valve in submersible and soft-sealing construction with fully vulcanized wedge in EPDM rubber. Gliding disc on she stem neck to reduce friction when operating the stem. From DN 250 and bigger with axial roller bearing. Triple stem seal of drinking water approved EPDM provides very good seal against atmosphere. The seal is replaceable under pressure according to ISO 7259. Valve body and bonnet are corrosion protected with high quality epoxy power coating min. thickness 250 micron. A protection ring between body and bonnet protects the surface treatment against damage during transport, storage and installation. The valve is equipped with a non-rising spindle and is manufactured according to the requirements of EN 1074 and EN 1171. Body-to-body design according to EN 558-1 series 14. Delivered without handwheel and extension stem, can be ordered separately. May also be automated with pneumatic or electric actuators.
Gate Valve VM2412
Gate valve in submersible and soft-sealing construction with fully vulcanized wedge in EPDM rubber. Gliding disc on she stem neck to reduce friction when operating the stem. From DN 250 and bigger with axial roller bearing. Triple stem seal of drinking water approved EPDM provides very good seal against atmosphere. The seal is replaceable under pressure according to ISO 7259. Valve body and bonnet are corrosion protected with high quality epoxy power coating min. thickness 250 micron. A protection ring between body and bonnet protects the surface treatment against damage during transport, storage and installation. The valve is equipped with a non-rising spindle and is manufactured according to the requirements of EN 1074 and EN 1171. Body-to-body design according to EN 558-1 series 14. Delivered without handwheel and extension stem, can be ordered separately. May also be automated with pneumatic or electric actuators.
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. The handwheel is retained by a clamping ring. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. Valve with split wedge is available for horizontal installations. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F5. Can also be equipped with a chain wheel or automated with an electric actuator.
Gate Valve VM2974
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. The handwheel is retained by a clamping ring. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. Valve with split wedge is available for horizontal installations. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F5. Can also be equipped with a chain wheel or automated with an electric actuator.
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. The handwheel is retained by a clamping ring. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. Valve with split wedge is available for horizontal installations. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F5. Can also be equipped with a chain wheel or automated with an electric actuator.
Gate Valve VM2975
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. The handwheel is retained by a clamping ring. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. Valve with split wedge is available for horizontal installations. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F5. Can also be equipped with a chain wheel or automated with an electric actuator.
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. The handwheel is retained by a clamping ring. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. Valve with split wedge is available for horizontal installations. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F5. Can also be equipped with a chain wheel or automated with an electric actuator.
Gate Valve VM2976
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. The handwheel is retained by a clamping ring. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. Valve with split wedge is available for horizontal installations. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F5. Can also be equipped with a chain wheel or automated with an electric actuator.
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F7 with flange according to DIN 2501. Can also be equipped with a chain wheel or automated with an electric actuator. Comes with EN 10204-3.1 certificate.
Gate Valve VM2977
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F7 with flange according to DIN 2501. Can also be equipped with a chain wheel or automated with an electric actuator. Comes with EN 10204-3.1 certificate.
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F7 with flange according to DIN 2501. Can also be equipped with a chain wheel or automated with an electric actuator. Comes with EN 10204-3.1 certificate.
Gate Valve VM2978
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F7 with flange according to DIN 2501. Can also be equipped with a chain wheel or automated with an electric actuator. Comes with EN 10204-3.1 certificate.
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F7 with flange according to DIN 2501. Can also be equipped with a chain wheel or automated with an electric actuator. Comes with EN 10204-3.1 certificate.
Gate Valve VM2979
Gate valve for applications with heat, hot water, steam and petrochemicals but also for other types of liquids and gases. Should not be used for regulation of media. The valve has a full bore and a rising external stem and a non-rising handwheel. Flexible wedge with very good result also in high and low temperature. In open position the wedge is fully retracted to ensure the lowest pressure drop. The valve is installed vertically with stem upright. In order to be able to maneuver larger dimensions with high differential pressures with reasonable force, the valve can be provided with a bypass line. We provide many more accessories for flexible installation solutions. Face-to-face design according to DIN 3202 F7 with flange according to DIN 2501. Can also be equipped with a chain wheel or automated with an electric actuator. Comes with EN 10204-3.1 certificate.